USAfixTM - Repair Guide (RG) - Master

Email RG

- Check the vacuum switch

Level of Difficulty - HIGH	Estimated Completion Time - 15 minutes
TASKI - SWINGO 150
	Tools Required Tool   Screwdriver-phillips Volt meter (True RMS capable)
	Parts Required

Step   Procedure & Parts & Tools 1 PULL DOWN ON THE HANDLE RELEASE LEVER AND LIFT UP ON HANDLE TO REMOVE IT. 2 DISCONNECT THE WHITE POWER PLUG. REMOVE THE 6 SCREWS IN BACK OF HANDLE. Screwdriver-phillips 3 LIFT UP ON THE BACK OF HANDLE TO SEPARATE FROM THE FRONT OF HANDLE. 4 LOCATE THE VACUUM SWITCH (THIS IS THE RED SWITCH). PULL THE RED WIRE CONNECTOR AND THE BLACK WIRE CONNECTORS TO DISCONNECT THE WIRES. PLACE THE VOLT METER LEADS ON THE POSTS WHERE THE WIRE CONNECTORS WERE (THE BOTTOM 2 POSTS)DOES NOT MATTER WHICH LEAD GOES WHERE. SET THE VOLT METER TO CONTINUITY. FLIP THE SWITCH ON. IF THE VOLT METER BEEPS, THE SWITCH IS OKAY. Volt meter (True RMS capable) 5 REVERSE STEPS 1 THRU 4 TO REASSEMBLE MACHINE.